Industrial & Marine Engine Oils

Pertamina lubricant formulated products designed specifically for industrial and marine engines which demands higher performance lubrication, Meditran Pertamina, Pertamina Pertamina SALYX Medipral and has proven its ability to protect the engine from wear and kororsi, and can break away from the water.

Pertamina SALYX lubricant is designed for marine diesel engine lubricants and industrial trunk piston type with intermediate rounds. Salyx have variants TBN of 12 – 50 mg KOH / g and a viscosity SAE 30-50. Salyx has been shown to have the ability to prevent wear and corrosion, broke away from the water and keep the engine clean. In the assessment report at the end of the trial in the engine lubricating Wartsilla, Wärtsilä technician stated that the engine clean before and after the trial is almost no different.

MEDRIPAL is a lubricant that is designed for marine diesel engine lubricants and industrial trunk piston type with intermediate rounds. Medripal have variants TBN of 12-50 mg KOH / g and a viscosity SAE 30, 40 and 50.

MEDITRAN P is a diesel engine oil and industrial marine trunk piston type middle rounds, which is made with a balanced additive package to provide optimal lubrication capability. Meditran P has 3 variants ie viscosity SAE 30, 40 and 50

SALYX is a lubricant that is designed for marine diesel engine lubricants and industrial trunk piston type with intermediate rounds. Salyx have variants TBN of 12-50 mg KOH / g and a viscosity SAE 30-50 .
Salyx has been shown to have the ability to prevent wear and corrosion, broke away from the water and keep the engine clean. In the assessment report at the end of the trial in the engine lubricating Wartsilla, Wartsilla technician stated that the engine clean before and after the trial is almost no different.
  • MEDITRAN P SAE 10W, 30, 40, 50
  • MEDRIPAL 8 SAE 40
  • MEDRIPAL 11 SAE 30, 40
  • MEDRIPAL 12 SAE 30, 40, 50
  • MEDRIPAL 20 SAE 30, 40
  • MEDRIPAL 30 SAE 30, 40
  • MEDRIPAL 40 SAE 40, 50
  • SALYX 8 SAE 30, 40
  • SALYX 12 SAE 30, 40
  • SALYX 20 SAE 30, 40
  • SALYX 30 SAE 30, 40
  • SALYX 40 SAE 30, 40, 50
  • DATA SHEET

MEDITRAN P Series are formulated from HVI (High Viscosity Index) base oils with a well balanced additive package which especially designed for diesel engine lubricant. MEDITRAN P Series have sufficient TBN to neutralize combustion acid; provides optimum protection against rust, corrosion & excessive wear; has a good balance between oxidation stability, detergency and dispersancy to prevent piston deposit formation and maintain engine cleanliness; and also able to easily separated from dirts and water at centrifugal separator. MEDITRAN P formulation also containing anti foam additive to prevent foaming.

table- meditran-p-sae-10w-30-40-50

PERFORMANCE LEVELS

MEDITRAN P Series meet the performance level of API CD

APPLICATIONS

MEDITRAN P 30, 40 and 50 are designed esspecially for lubrication of medium speed trunk piston industrial and marine diesel engines burning distillate diesel fuel with sulphur content less than 0.5% wt.

MEDITRAN P 10W is recommended for hydraulic system on some marine and heavy duty off highway equipments.

MEDRIPAL 8 SAE 40 are formulated from High Viscosity Index (HVI) base oil and a well balanced additive package. MEDRIPAL 8 SAE 40 provide excellent protection for crankshaft bearings from excessive wear and corrosion, has a balanced features of oxidation stability, detergency & dispersancy to prevent deposit formation and maintain engine cleanliness, and able to separate dirts and water at centrifugal separator. MEDRIPAL 8 SAE 40also containing anti foam additives to prevent foaming.

table- medripal-8-sae-40

PERFORMANCE LEVELS

MEDRIPAL 8 SAE 40meets API CC.

APPLICATIONS

MEDRIPAL 8 SAE 40 is suitable for lubrication of medium speed diesel engine operated with low sulfur distillate fuel, which required oil with specification as above. MEDRIPAL 8 SAE 40 is also can be used in other application such as lubricant of hydraulic system, variable pitch propeller and other deck machineries.

MEDRIPAL 11 Series are formulated from HVI (High Viscosity Index) base oils with a well balanced additive package especially designed for diesel engine lubricant. MEDRIPAL 11 Series have sufficient TBN to neutralize combustion acid; provides optimum protection against rust, corrosion & excessive wear; has a good balance between oxidation stability, detergency and dispersancy to prevent piston deposit formation and maintain engine cleanliness; and also able to easily separate from dirts and water at centrifugal separator. MEDRIPAL formulation also containing anti foam additive to prevent foaming.

table- medripal-11-sae-30-40

PERFORMANCE LEVELS

MEDRIPAL 11 Series meet performance level of API CD.

APPLICATIONS

MEDRIPAL 11 Series are designed for lubrication of medium speed trunk piston industrial and marine diesel engines burning distillate diesel fuel with sulphur content less than 0.5% wt. MEDRIPAL 11 Series are also recommended for other applications, such as transmission gear, variable pitch propeller and deck machineries which require API CD lubricants.

MEDRIPAL 12 Series are formulated from HVI (High Viscosity Index) base oils with a well balanced additive package especially designed for diesel engine lubricant. MEDRIPAL 12 Series have sufficient TBN to neutralize combustion acid; provides optimum protection against rust, corrosion & excessive wear; has a good balance between oxidation stability, detergency and dispersancy to prevent piston deposit formation and maintain engine cleanliness; and also able to easily separate from dirts and water at centrifugal separator. MEDRIPAL formulation also containing anti foam additive to prevent foaming.

table- medripal-12-sae

PERFORMANCE LEVELS

MEDRIPAL 12 Series meet API Ser vice Classification CD.

APPLICATIONS

MEDRIPAL 12 Series are designed esspecially for lubrication of medium speed trunk piston industrial and marine diesel engines burning distillate diesel fuel with sulphur content less than 0.5 %wt. MEDRIPAL 512 is not designed for cylinder lubrication of two stroke crosshead diesel engine

MEDRIPAL 20 Series are formulated from HVI (High Viscosity Index) base oils with a well balanced additive package especially designed for diesel engine lubricant. MEDRIPAL 20 Series have sufficient TBN to neutralize combustion acid; provides optimum protection against rust, corrosion & excessive wear; has a good balance between oxidation stability, detergency and dispersancy to prevent piston deposit formation and maintain engine cleanliness; and also able to easily separate from dirts and water at centrifugal separator. MEDRIPAL formulation also containing anti foam additive to prevent foaming

table- medripal-20-sae

PERFORMANCE LEVELS

MEDRIPAL 20 Series meet performance level of API CF

APPLICATIONS

MEDRIPAL 20 Series are recommended for lubrication of medium speed industrial and marine diesel engines, which using distillate diesel fuel with sulphur content up to 1% wt.

MEDRIPAL 30 Series are formulated from HVI (High Viscosity Index) base oils with a well balanced additive package especially designed for diesel engine lubricant. MEDRIPAL 30 Series have sufficient TBN to neutralize combustion acid; provides optimum protection against rust, corrosion & excessive wear; has a good balance between oxidation stability, detergency and dispersancy to prevent piston deposit formation and maintain engine cleanliness; and also able to easily separate from dirts and water at centrifugal separator. MEDRIPAL formulation also containing anti foam additive to prevent foaming.

table- medripal-30-sae

PERFORMANCE LEVELS

MEDRIPAL 30 Series meet performance level of API CF. MEDRIPAL 430 is approved by Wartsila for Wartsila Vasa 22/26/32, Wartsila 20/26/32/38/46/64 and Sulzer Z40/ZA40/ ZA40S.

APPLICATIONS

MEDRIPAL 30 Series are recommended for lubrication of highly rated medium speed industrial and marine diesel engines using residual diesel fuel with sul phur content up to 1% wt.

MEDRIPAL 40 Series are formulated from HVI (High Viscosity Index) mineral base oils with a well balanced additive package especially recomended for diesel engine lubricant. MEDRIPAL 40 Series have sufficient TBN to neutralize combustion acid; provides optimum protection against rust, corrosion & excessive wear; has a good balance between oxidation stability, detergency and dispersancy to prevent piston deposit formation and maintain engine cleanliness; and also able to easily separate from dirts and water at centrifugal separator. MEDRIPAL formulation also containing anti foam additive to prevent foaming.

table- MEDRIPAL-40-SAE

PERFORMANCE LEVELS

MEDRIPAL 40 Series meet performance level of API CF. MEDRIPAL 440 is approved by Wartsila for Wartsila Vasa 22/26/32, Wartsila 20/26/32/38/46/64 and Sulzer Z40/ZA40/ ZA40S.

APPLICATIONS

MEDRIPAL 40 Seriesare suitable for highly rated turbocharged medium speed trunk piston diesel engines using heavy diesel fuel with high sulphur content (max. 3.5% wt). MEDRIPAL 540 is not designed for cylinder lubrication of two stroke crosshead diesel engine.

SALYX 8 Series are formulated from High Viscosity Index (HVI) base oil and a well balanced additive package. SALYX 8 Series provide excellent protection for crankshaft bearings from excessive wear, rust and corrosion; very good oxidation stability; good detergency & dispersancy to maintain engine cleanliness; and able to separate dirts and water at centrifugal separator. SALYX formulation also containing anti foam additives to prevent foaming.

table salyx-8

APPLICATIONS

SALYX 8 SAE 30is suitable as crankcase or system oil for crosshead low speed two stroke marine diesel engines. SALYX 8 SAE 40 is suitable for lubrication of medium speed diesel engine operated with low sulfur distillate fuel, which required oil with specification as above. SALYX 8 Series are also can be used in other application such as lubricant of hydraulic system, variable pitch propeller and other deck machineries.

SALYX 12 Series are formulated from HVI (High Viscosity Index) base oils with a well balanced additive package especially designed for diesel engine lubricant. SALYX12 Serieshave sufficient TBN to neutralize combustion acid; good TBN retention that gives longer drain interval; provides optimum protection against rust, corrosion & excessive wear; has very good oxidation stability, good detergency and dispersancy to maintain engine cleanliness; and also able to easily separate from dirts and water at centrifugal separator. SALYX formulation also containing anti foam additive to prevent foaming.

table salyx-12

PERFORMANCE LEVELS

SALYX 412 has been approved by MAK Caterpillar.

APPLICATIONS

SALYX 12 Series are designed for lubrication of medium speed trunk piston industrial and marine diesel engines burning distillate diesel fuel with sulphur content less than 0.5% wt. SALYX 12 Series are recommended also for other applications, such as transmission gear, variable pitch propeller and deck machineries which require such lubricant

SALYX20 Series are formulated from HVI (High Viscosity Index) base oils with a well balanced additive package especially designed for diesel engine lubricant. SALYX20 Series have sufficient TBN to neutralize combustion acid; good TBN retention that gives longer drain interval; provides optimum protection against rust, corrosion & excessive wear; has very good oxidation stability, good detergency and dispersancy to maintain engine cleanliness; and also able to easily separate from dirts and water at centrifugal separator. SALYX formulation also containing anti foam additive to prevent foaming.

table salyx-20

PERFORMANCE LEVELS

SALYX 20 Seriesmeet performance level of API CF, Niigata (approved) and MAK (approved).

APPLICATIONS

SALYX 20 Seriesare recommended for lubrication of medium speed industrial and marine diesel engines, which using distillate diesel fuel with sulphur content up to 1% wt.

SALYX 30 Series are formulated from HVI (High Viscosity Index) base oils with a well balanced additive package especially designed for diesel engine lubricant. SALYX30 Series have sufficient TBN to neutralize combustion acid; good TBN retention that gives longer drain interval; provides optimum protection against rust, corrosion & excessive wear; has very good oxidation stability, good detergency and dispersancy to maintain engine cleanliness; and also able to easily separate from dirts and water at centrifugal separator. SALYX formulation also containing anti foam additive to prevent foaming.

table salyx-30

PERFORMANCE LEVELS

SALYX 30 Seriesmeet performance level of API CF. SALYX 430has approval from Niigata and Wartsila.

APPLICATIONS

SALYX 30 Series are recommended for lubrication of highly rated medium speed industrial and marine diesel engines using residual diesel fuel with sul phur content up to 1% wt.

SALYX 40 Series are formulated from HVI (High Viscosity Index) mineral base oils with a well balanced additive package especially recomended for diesel engine lubricant. SALYX 40 Serieshave sufficient TBN to neutralize combustion acid; good TBN retention that gives longer drain interval; provides optimum protection against rust, corrosion & excessive wear; has very good oxidation stability, good detergency and dispersancy to provide good asphaltene handling ability and maintain engine cleanliness; and also able to easily separate from dirts and water at centrifugal separator. SALYX formulation also containing anti foam additive to prevent foaming.

table salyx-40

PERFORMANCE LEVELS

SALYX 40 Seriesmeet performance level of API CF. SALYX 440has approval from Niigata and Wartsila.

APPLICATIONS

SALYX 40 Series are suitable for highly rated turbocharged medium speed trunk piston diesel engines using heavy diesel fuel with high sulphur content (max. 3.5% wt). SALYX 540 is not designed for cylinder lubrication of two stroke crosshead diesel engine.

 Industrial & Marine Engine Oils